Parallel Tube Connector for 25 / 30 mm Tubes | OUTMAR

The parallel tube connector is designed to connect two parallel tubes with an outside diameter of 25 or 30 mm, depending on the version choosen. It is used for example with NOA Outlaying Frames when the boat's existing railing stanchions cannot be removed.

For the standard installation of an Overhang Frame, the existing railing stanchions are removed and replaced by the 200 mm stanchions supplied with the frame. The Outlaying Frame is then mounted to these stanchions.

If the existing railing stanchions cannot be removed, the parallel tube connector provides an alternative mounting solution. An additional stanchion is installed parallel to the boat's existing stanchion. As the standard 200 mm stanchions supplied with the Overhang Frame are generally too short for this installation, we offer 500 mm railing stanchions for this purpose.

The additional 500 mm stanchion is secured to the existing railing stanchion using two parallel tube connectors. The Outlaying Frame can then be mounted to the additional stanchion as intended.

Important When Selecting

• connects two parallel tubes
• suitable for 25 mm or 30 mm outside tube diameter
• for installing Overhang Frames when existing railing stanchions cannot be removed
• 2 connectors required per additional stanchion
• recommended for use with our 500 mm railing stanchion
• made from aluminium

Please note: Check the outside diameter of your existing railing stanchions before ordering. This connector is only suitable for tubes with an outside diameter of 25 mm or 30 mm (separate Versions).