Aluminium Tube Ø 30 × 2 mm with NOA Two-Pronged End Fitting – for Overhang Frames | OUTMAR

The 30 mm aluminium tube with Original NOA Two-Pronged End Fitting is a special component for NOA Overhang Frames. It is used as the inner tube of the telescopic supports at the pulpit or pushpit.

The double end fitting is made from glass-fibre reinforced plastic and is fitted to the lower end of the tube. It provides the connection to the two outer tubes running along the sides of the boat as part of the Overhang Frame.

The aluminium tube has an outside diameter of 30 mm and a wall thickness of approximately 2 mm. It slides into the corresponding 35 mm outer tube of the support, allowing the support height to be adjusted.

Important: This version is designed for the telescopic supports at the pulpit or pushpit. For the additional telescopic rail supports of the NOA Overhang Frame, 55 cm long aluminium tubes with a 30 mm diameter and double end fitting are used.

Specifications:

• Aluminium tube Ø 30 mm
• Wall thickness approx. 2 mm
• With Original NOA Double End Fitting
• Fitting made from glass-fibre reinforced plastic
• Inner tube for the pulpit and pushpit supports of the NOA Overhang Frame
• 1 piece