Anchor Bracket for Bruce, M & Delta Anchors, stainless steel I ATLANTIC BOATING

The Atlantic stainless steel anchor brackets for Bruce, M and Delta anchors are the ideal solution when you want to securely store your anchor on a boat guard rail, stern rail, or bulkhead. Designed for marine use, they keep your anchor safely in place and easily accessible on board.

Two model variants are available:

• For anchors from 3–10 kg

• For anchors from 10–20 kg

This makes the anchor bracket suitable for smaller recreational boats as well as larger sailing and motor yachts.

Flexible mounting on board or on a bulkhead

You can mount the anchor bracket on vertical, angled or horizontal rail tubing. A combined installation is also possible, for example with the upper clamp on a horizontal rail and the lower support on a vertical stanchion.

Bulkhead (wall) mounting is also possible: simply remove the detachable clamp half and screw the fixed clamp directly to the wall. If the screws pass through the surface, we recommend using a backing plate for proper load distribution.

Mounting on two horizontal rails is also possible, provided the distance between the rails is between 150 and 350 mm.

Secure and rattle-free hold

At the top, the anchor is suspended using a shackle connected to an eye on the clamp. The lower end rests in a sturdy stainless steel fork fitted with a tension screw. This keeps your anchor securely in place and rattle-free, even in heavy weather, rough seas, or during fast motoring.

Versions & Dimensions

AB-000310 (for anchors 3–10 kg)

• Suitable for mounting on rail tubes Ø 22–30 mm
• Bulkhead mounting possible
• Length: 450 mm
• Inner width (top): max. 14 mm
• Inner width (bottom / anchor shank): max. 40 mm
• Weight: 1.20 kg
• Support rod diameter: 8 mm

AB-001020 (for anchors 10–20 kg)

• Suitable for mounting on rail tubes Ø 22–30 mm
• Bulkhead mounting possible
• Length: 500 mm
• Inner width (top): max. 22 mm
• Inner width (bottom / anchor shank): max. 40 mm
• Weight: 1.95 kg
• Support rod diameter: 12 mm