Steel boat stand for motorboats up to 2,750 kg per stand (LCMg) I TYRESÖSTÖTTAN

The TYRESÖSTÖTTAN LCMg steel boat stands provide a robust solution for storing your motorboat ashore. The boat rests on suitable keel supports or timber blocks. The stands are positioned on both sides of the hull and, together with the keel support, form a stable storage system.

The straight LCMg stands are suitable for motorboats and other boats with flat or only slightly angled hull contact areas. Four different height ranges allow them to be adapted to different boat sizes, hull shapes and supporting positions.

Each boat stand has a maximum load capacity of 2,750 kg. A threaded spindle with a large wing nut allows the height to be adjusted quickly and continuously. The generously sized EPDM hull pad provides secure contact and protects the hull against scratches and pressure marks.

The hot-dip galvanized steel construction provides long-lasting corrosion protection. This makes the LCMg series suitable for private boat owners as well as regular use by boat clubs, marinas and boatyards.

The boat stands are easy to assemble and can be taken apart again after the winter storage season. This allows them to be transported and stored with less space.

Four heights available

• LCMg 500: 500–800 mm, weight approx. 11 kg
• LCMg 600: 600–900 mm, weight approx. 12 kg
• LCMg 750: 750–1,050 mm, weight approx. 15 kg
• LCMg 900: 900–1,200 mm, weight approx. 16 kg

All versions feature a 450 mm threaded spindle. The appropriate size depends on the height and shape of the hull as well as the position at which the stand will be placed.

For flat and slightly angled hull sections

The straight LCMg boat stands are primarily designed for motorboats. However, the decisive factor is not only the type of boat, but also the shape of the hull at the individual contact point.

For steeply angled or V-shaped hull sections, we recommend the angled LCFg sailing boat stands. On a motorboat, a combination of straight LCMg stands at the stern and angled LCFg stands at the bow may be required.

Securing the stands with chains

The boat stands feature quick attachment points for safety chains. The chains connect the opposing stands and help prevent them from moving outwards under load.

The required safety chains are not included and must be ordered separately.

Product details

• straight steel boat stand for motorboats
• for storing boats ashore
• suitable for flat and slightly angled hull sections
• maximum load capacity: 2,750 kg per stand
• fast and continuously variable height adjustment
• trapezoidal thread with large wing nut
• 450 mm threaded spindle
• durable hot-dip galvanized steel construction
• long-lasting corrosion protection
• high-quality EPDM hull pad
• hull pad dimensions: 310 × 160 × 25 mm
• profiled contact surface for secure support
• easy to assemble and take apart again
• space-saving transport and storage
• quick attachment points for safety chains
• available in four height ranges

Included

• 1 TYRESÖSTÖTTAN LCMg steel boat stand in the selected size

Safety chains, keel supports, timber blocks and additional boat stands are not included.

Important information

The boat stands must be used together with a correctly installed keel support. They are not designed to support the entire weight of the boat on their own.

The number and position of the stands and the type of keel support must be selected according to the boat’s weight, length and hull shape. Opposing stands must be connected using suitable safety chains. Please also observe the requirements of your winter storage location. If you have any questions, we will be happy to help.