NOA Turning solar panel mount 50 x 1800 mm

Rotatable mast mount for solar modules from NOA Aluminium, Sweden. The 50 mm mast is the "largest" of the series of rotating masts for solar modules and is recommended by us for use in inland and coastal areas and on the open sea for solar modules with aluminum frame and glass of up to about 100 W and a weight of about 10 kg. The very stable mounting is done with the mast foot on deck, which is included in the delivery, and is fixed by the stays, which are attached to the railing. By means of a lever, the mast can be released in the upper area with the mounted solar module, in order to then turn and fix it in the direction with the maximum solar radiation.

In the box:

• Solar module mast made of anodized aluminum with a mast diameter of 50 mm and a mast length of 1,800 mm
• 2x adjustable mounting profiles 650 mm to hold one solar module (with frame), the mounting profiles can be shortened individually
• 1x cross beam 600 mm, tube diameter 25 mm
• 1x NOA clamping lever - clamps the inner mast and enables easy alignment of the solar module according to the position of the sun.
• 2 supports à 1.500 mm incl. 2 NOA rail fittings for the railing with railing diameter 25 mm for stable mounting of the mast to the railing/ pushpit (please contact us if you want to mount the mast to a railing with a diameter different from 25 mm)
• railing bracket for 50 mm masts incl. 2 NOA tube holders 25 mm
• adjustable mast foot - allows mounting also on an inclined transom

Customer review:

"By the way, the solar mount has proven itself and equipped with a 120 W solar panel ( on a 5 mm Dibond plate) survived the first storms ( up to about 70 kn ) without damage. Although I have mounted only one support because half the clamp went down during installation." OUTMAR comment: The clamp is now mounted again...