No results were found for the filter!
NOA Fitting hinge 25 mm NOA Rohrhalter selbstklemmend - die seitlichen Backen des Rohrhalters können durch eine Schraube nur soweit zusammengedreht werden, dass der Rohrhalter auf einem 25 mm Rohr noch etwas Spiel hat. Dieser Rohrhalter wird z.B. für den Heckkorbsitz oder den Ankerausleger verwendet, damit diese auf dem Relingsrohr hoch- bzw. runtergeklappt werden können.
€13.95 *
NOA Cross fitting for tubes The NOA Cross Fitting securely connects a vertical tube to a horizontal railing tube. It is suitable for mounting a solar mast or Starlink mount to the railing. An additional NOA Round Rail Fitting is required for attachment to the horizontal railing tube. The cross fitting is available in three versions: Item NA-10814: for vertical tubes with an outside diameter of 25 mm...
From €25.95 *
Wing nut DIN 315 stainless steel A4 M8 Ersatz Flügelmutter für die M8 Schraube der NOA Rohrhalters.
€1.45 *
NOA Rail mount fitting 30 mm NOA rail mount fitting made of seawater-resistant aluminum. Only the two aluminum half-shells that fit a 30 mm round tube are included with this item. If mounting on smaller tube diameters is planned, plastic bushes are required, which we offer for diameters between 18 and 28 mm. These are shown below as “Accessories”.
€8.50 *
Parallel Tube Connector for 25 / 30 mm Tubes | OUTMAR The parallel tube connector is designed to connect two parallel tubes with an outside diameter of 25 or 30 mm , depending on the version choosen. It is used for example with NOA Outlaying Frames when the boat's existing railing stanchions cannot be removed. For the standard installation of an Overhang Frame, the existing railing stanchions are removed and replaced by the 200...
From €13.95 *
Viewed