No results were found for the filter!
NAWA Single Connector The NAWA Connector is used to attach NAWA brackets and holders (NAWA Lifebuoy holder, Antenna holder ...) to a boat rail. The connector is made of black, sun and seawater resistant nylon and is fitted with stainless steel screws. We offer the connector in four versions, for 22, 25, 30 and 32 mm thick railings.
€12.95 *
Hint!
STARLINK OM-H Rail mount fitting for horizontal tubes, pushpits Are you looking for a mounting for your STARLINK antenna on a horizontal railing tube or a stern arch? The solution is the STARLINK OM-H aluminium cross bracket! It consists of two tube holders the bracket with an internal diameter of 25 mm or 30 mm for attachment to the horizontal tube (please select the variant that suits you best) the holder with an internal diameter of...
From €39.95 *
NOA Round Rail double fitting NOA Double round rail fitting made of aluminum. Measuremts: Double fitting 30, 32 and 38 mm: 110 x 53 x 44mm (L x B x H), 230g Double fitting 25 mm: 86 x 40 x 42mm (L x B x H), 170g
From €18.95 *
NOA Round Rail fitting NOA Round Rail fitting to fasten virtually anything to a railing on boats, pontoons, house boats, balconies etc. The clamp body consists of two seawater resistant aluminium clamp halfs with a screw eye and has an outside diameter of 30 mm/40 mm and two weather proof and UV resistant plastic half inserts in various diameters for tubes with 18 mm, 22 mm, 25 mm for the 30 mm...
From €12.50 *
Hint!
STARLINK Mast Mount/Stanchion mount Attach your STARLINK antenna to a railing tube, mast or arch with the double tube holder made of seawater-resistant aluminum. The tube of the STARLINK antenna has an outer diameter of 38 mm in the upper area and 34 mm in the lower area. We recommend mounting with a double tube holder in the upper area above the locking knob. The double tube holder has a socket for a 30 mm or...
From €28.95 *
NOA double mast holder with twist grip NOA double mast holder made of seawater resistant aluminium. With this tube holder it is possible to attach a vertical mast with a tube diameter of 30 mm to an existing 25 mm pushpit. The twist grip allows the mast to be loosened and easily turned. Two double tube brackets are required for a stable installation.
€21.95 *
Viewed