Sail handling & trim

When sailing, it’s often the small things that make the difference. In this category, you’ll find practical solutions that make everyday life on board easier, keep things organized and help you stay in control of your boat. Halyard deflectors, for example, prevent halyards from slapping loudly against the mast in the marina, while lazy jack systems help you lower and contain your mainsail quickly and neatly without it falling all over the deck. Wind indicators or shroud telltales give you instant feedback on wind direction right in your line of sight – without having to look up the mast or rely on instruments. Load sensors support you when rigging and help you better understand and control loads, contributing to both safety and reduced wear. And on deck, the right equipment keeps things tidy: spinnaker pole holders ensure your pole is stored securely and not in the way. The result is a clean, functional setup – for more relaxed sailing and better control on board.

When sailing, it’s often the small things that make the difference. In this category, you’ll find practical solutions that make everyday life on board easier, keep things organized and help you... read more »
Close window
Sail handling & trim

When sailing, it’s often the small things that make the difference. In this category, you’ll find practical solutions that make everyday life on board easier, keep things organized and help you stay in control of your boat. Halyard deflectors, for example, prevent halyards from slapping loudly against the mast in the marina, while lazy jack systems help you lower and contain your mainsail quickly and neatly without it falling all over the deck. Wind indicators or shroud telltales give you instant feedback on wind direction right in your line of sight – without having to look up the mast or rely on instruments. Load sensors support you when rigging and help you better understand and control loads, contributing to both safety and reduced wear. And on deck, the right equipment keeps things tidy: spinnaker pole holders ensure your pole is stored securely and not in the way. The result is a clean, functional setup – for more relaxed sailing and better control on board.

1 From 2
No results were found for the filter!
Wantenverklicker I outmar.com
PFEIFFER MARINE Wantenverklicker / Windfahne für Wanten oder Achterstag
Häufig ist die Sicht auf den Verklicker am Masttopp durch ein Bimini erschwert, oder der Blick in den Mast wird durch Wind und Wetter behindert - Abhilfe können diese kleinen Wantenverklicker bieten. Sie lassen sich in der gewünschten Höhe mit der Spiralfeder einfach an den Wanten oder am Achterstag (bis zu einem Drahtdurchmesser von ca. 7 mm) befestigen und zeigen...
From €19.95 *
Load Sensors
Load Sensors
The Smarttune load sensor replaces a traditional turnbuckle in the forestay (without furler) or shrouds and measures actual rig tension in real time. Data is transmitted directly to a smartphone app or via an NMEA gateway to onboard instruments. This allows precise and repeatable rig tuning without guesswork. Marks and tape become unnecessary, while overloads and structural...
From €1,390.00 *
Halyard Diverter
Halyard Diverter
Slapping halyards are one of the most common annoyances on board – especially at night in the marina. The Pfeiffer Marine halyard diverter provides a simple and effective solution. Mounted on the spreader, it keeps halyards away from the mast, reducing noise and preventing chafe. Installation is quick and easy: attach the diverter to the spreader using cable ties, guide the...
€14.95 *
Lazy Jack Typ 1
Lazy Jack System
We offer two Lazy Jack systems from Pfeiffer Marine : Type 1 – for sailboats up to 9 m / 30 ft Type 2 – for sailboats up to 12 m / 40 ft The system is particularly easy to install while the mast is still unstepped. Package Contents Type 1 – for boats up to 9 m / 30 ft 2 × Single blocks 10 × Eye straps 2 × Lines, 4 m each 2 × Lines, 7 m each, each with a single block attached...
From €199.95 * €260.00 *
Spibaum-Halter Set
PFEIFFER MARINE Spinnaker pole / Boom holder SET
The spinnaker pole holder SET from PFEIFFER MARINE made of stainless steel consists of the ring holder, into which the spinnaker pole is pushed and the L-holder, on which the spinnaker pole fitting is hung and fixed. The ring holder has an inner diameter of 85 mm and an outer diameter of 100 mm. Both holders can be attached to vertical railing supports with a diameter of...
€83.95 *
Spibaum-Halter/Spibaum-Ringhalter
PFEIFFER MARINE Spinnaker pole / Boom holder
The spinnaker pole ring holder from PFEIFFER MARINE is made of stainless steel. The ring holder has an inner diameter of 85 mm and an outer diameter of 100 mm. The holder can be attached to vertical railing supports with a diameter of max. 25 mm. In the box: Stainless steel ring holder Stainless steel fixing screws 4x
€41.95 *
1 From 2
Viewed