Lagun Cockpit Table Mounting System

Additional plastic shim/wedge (92 x 170 mm) for mounting the Lagun cockpit table frame if the mounting area is off vertical. In the box: 1 x plastic compensation wedge (white) to be mounted under the mounting plate to compensate for the inclination of the cockpit locker/seat thwart etc. (max. thickness of the individual wedge approx. 5 mm)

Original replacement table leg (700 mm) for the Lagun Cockpit table frame incl. handle/lever.

Original Lagun end plug for the arm of the Lagun cockpit table frame.

Original Lagun table cover/bag for boat table tops mounted on the Lagun table frame. The Lagun table bags have the advantage that they are cut extra wide and can therefore hold the boat table including mounting plate, table arm and table foot. They are ideal for protecting both the table top and your boat or mobile home from damage such as scratches etc. The table bag is...

Original replacement plastic end plug for the Lagun table base or the Lagun table leg. When do I need the plug? After years of use, the plug can wear out a little - the table arm can then still be attached to it, but no longer at a right angle, but at a slight angle. When transporting the table frame, the table leg is pushed into the table top - if the locking handle is not...

Very beautifully finished table top for the boat or camper cabin and the boat cockpit. The approx. 13 mm thick table top is made of imitation teak and is bordered by an approx. 22 mm thick real wood edge. The recessed edge at one corner is not a fault, but serves to facilitate the removal of crumbs or spilled liquid. The plate has a net weight of approx. 3 kg (70 x 42 cm)/ 5...