No results were found for the filter!
NOA Stern Arch for boat widths up to 3.6m Mounting an arch has never been so easy! The NOA Stern arch single is an equipment carrier made of seawater-resistant aluminium for light loads (up to approx. 25 kg) and for simple self-mounting on the pushpit of sailing yachts. Ideal for mounting solar modules! The equipment carrier consists of the two arch legs /supports made of 30 mm aluminium tube a centre bridge with a...
€749.00 *
NOA Round Rail double fitting NOA Double round rail fitting made of aluminum. Measuremts: Double fitting 30, 32 and 38 mm: 110 x 53 x 44mm (L x B x H), 230g Double fitting 25 mm: 86 x 40 x 42mm (L x B x H), 170g
From €22.95 *
BATSYSTEM Boat Davit stainless steel with tackle This complete twin-arm davit kit includes everything you need for safe and easy handling of your dinghy. This strong and reliable davit uses pulling and pushing forces to keep the dinghy clear of the boat, allowing it to be lifted effortlessly over obstacles such as bathing platforms. In the box: 2x stainless steel davit arm, with a tube dimension of 25, 32 or 42 mm and a...
From €1,960.00 *
ATLANTIC TOWERS Schedule 80 Geräteträger bis 185 kg, Selbstmontage, Trägerbeine in einer Linie Endlich erhältlich - ein universeller Geräteträger zur Selbstmontage! Der Sail Arch® Schedule 80 ist ein Geräteträger für große Lasten (bis 185 kg) zur Heckmontage auf Segelyachten, deren Heck gleichbleibend breit ausläuft, d.h., dass die beiden Beine des Steuerbord- und Backbordträgers in einer Linie stehen. Im Zubehör bieten wir einen "Tender Handler" zu Deutsch Boots...
From €4,870.00 *
BATSYSTEM Boat Ladder transom mount 5 steps Folding ladder - especially for boats with positive transom, e.g. Folke boats / IF boats - including spacers that enable vertical ascent and descent! The ladder is attached to the deck with the two upper angle fittings. A little further down, after approx. 50 cm, there are braces that support the ladder at the stern. There are two variants: BUT55 with 2x 110 mm struts BUT55F...
From €445.00 *
Hint!
LAGUN Extension bracket for the LAGUN mounting plate The LAGUN Extension bracket made of aluminium is always the right solution when the LAGUN table frame is mounted on a cockpit locker or bench where the lid or a sofa cushion protrudes. The table leg cannot then be fitted as it will hit the cushions or the lid. This is remedied by the spacer plate, which creates a distance of 25 mm from the vertical wall and thus enables the...
From €44.95 *
Viewed