LAGUN Table frame PLUS for Boats, Caravans and Mobile homes, NEW tiltable table top

NEW The Lagun table frame is now also available in a further version - Lagun table frame PLUS! The PLUS version offers an additional function - the table top can be tilted steplessly up to 90°.

With only one handle the table top swivels into the vertical position and free space is created without having to dismantle the table top or the table frame. A wish expressed by many campervan users
the Lagun table frame becomes the ideal home office desk - adjustable in height and inclination!
Furthermore, the table frame can be rotated 360° and adjusted in height.

The previous arguments for the Lagun table frame are of course also valid for the PLUS version: The Lagun table frame is the solution for you if you want to mount a table in the smallest space, such as on smaller yachts, ships and boats or in campervans and caravans. The advantage of this design is that any table top can be mounted and that only one table leg is needed. The table can be freely pivoted (360 °), is height-adjustable and in just a few minutes it is auf.-und also dismantled again.

In the box:

• Aluminum mounting plate (92 mm x 170 mm x 13 mm) for mounting the table frame on the seat bay in the cockpit or e.g. at the helmstand.
• 2 x plastic compensating wedges (white) which can be mounted under the mounting plate, if necessary, to compensate for an inclination of the forecastle/seat cove etc. (max. thickness of the individual wedge approx. 5 mm - further wedges can be ordered individually)
• 1 x wooden counter plate - the counter plate should always be used when the aluminum mounting plate is mounted on surfaces that could break out under greater load of the table (wood, GRP, ...). Attention! Some suppliers save this counter plate - but we advise against mounting on wood and GRP surfaces without the counter plate and therefore offer this in the standard equipment with.
• 4 x stainless steel countersunk mounting screws incl. lock nuts/washers (8 mm x 50 mm)
• Aluminum table leg/table base (500 mm) -> please note - we also offer variantsb with a 700 mm or 900mm long table leg for special applications. The table legs can also be purchased separately.
• Aluminum table arm (400 mm)
• Adjustable under table mounting plate (200 mm x 200 mm x 95 mm) to hold a table top.
• 3 x locking handle - ATTENTION! Do not tighten the handles too much - they could be damaged in the long term and will be difficult to remove!
• Weight: 3,5 kg

Application:

The table foot is pushed into the mounting plate and can be variably fixed there at different heights using the clamping screw handle. The table arm is slid onto the table foot, which can be rotated 360° and also fixed. The table top is then mounted on the table arm with the help of the adjustable under-table mounting plate - this can then also be rotated freely again, or fixed with a clamping screw handle. The space under the table remains free!

Many Lagun users buy another mounting plate and can then use the table in several places.

The frame is made of high quality silver anodized aluminum and is seawater resistant, plastic parts made of PP, table arm sleeves made of fiberglass reinforced plastic!

Assembly:

You can see from our graphic "LAGUN TABLE FRAME HEIGHT SPECIFICATIONS" that the mounting plate should have at least 10 cm to the floor to use the adjustable height range of the table frame. Example:

typical bench height 45 cm
typical table top height 65 - 75 cm
distance from the bench to the table top approx. 20 cm
To calculate the mounting height for the lower edge of the mounting plate, subtract the 48 cm for the lowest position with the 50 cm leg from the height of 65 cm and get 17 cm. If the top is mounted with the bottom edge at 17 cm above the floor, you can adjust the height of the table in the range from 65 cm to 80 (17 + 63) cm.