No results were found for the filter!
NOA Aluminium Tube 30 mm Original NOA aluminum round tube with a diameter of 30mm and a wall thickness of approx. 2mm. The 30mm aluminum tube is used as the inner tube for the NOA Telescopic legs as well as the outer tube for the outlaying frames.
From €8.95 *
NOA Aluminium Tube 35 mm Original NOA aluminum round tube with 35mm outer diameter and a wall thickness of approx. 2mm. The 35mm aluminum tube is used as the outer tube for the NOA telescopic legs. The 35mm tubes have a hole at each end to attach the telescopic...
From €14.95 *
NOA Aluminium Tube 30 mm incl. two-pronged end fitting Original NOA aluminum round tube with 30 mm diameter (wall thickness approx. 2 mm) and double fitting made of glass fiber reinforced plastic. The 30 mm aluminum tube with double fitting is used as the inner tube for the NOA telescopic...
From €14.95 *
Aluminium Tube Ø 30 × 2 mm for Telescopic Railing Supports with Original NOA Single End Fitting |... The OUTMAR aluminium tube Ø 30 × 2 mm with a fitted original NOA single end fitting forms the lower section of a telescopic railing support. It slides into the upper telescopic tube, allowing the support to be adjusted to the required...
From €15.95 *
NOA Aluminium Tube 25 mm Original NOA aluminum round tube with a diameter of 25 mm and a wall thickness of approx. 2mm.
From €7.95 *
Hint!
OUTMAR Telescopic leg with articulated foot (1 pc.) Single aluminum telescopic deck support with 35mm T-connector and articulated base. We offer this single support as an additional central support to be used to support the ridge tube of a deck frame. On smaller motorboats in particular,...
€20.95 *
Viewed