Anchor and Anchor Accessories

Anchor hook made of stainless steel for mounting a fluke anchor or Danforth anchor on a railing tube. To safely store an anchor on your rail you need two anchor hooks as well as the NOA Round Rail fitting matching the diameter of your railing. In the box: 1x stainless steel hook (110 x 35 x 45 mm) 1x stainless steel screw (to mount the hook to the round rail fitting

The NOA chain container holds approx. 4 m of an 8 mm anchor chain and approx. 5 - 6 m of a 6 mm anchor chain and is designed for convenient storage of the chain lead of a stern anchor. Ideal in combination with the NOA anchor holder and NOA stern anchor boom. Dimensions of the chain container: 550 x 80 mm In the box: Chain tank and 2x NOA Round Rail fittings for 25 mm -...

In order to ensure maximum anchor/stern anchor holding power, a short length of chain should be used between the anchor line/rope and anchor. The chain is more resistant to dragging on the bottom, to prevent anchor line/rope damage. Furthermore, the chain keeps the anchor’s hooking angle sharp for better hold. In many cases, even five metres of chain is sufficient. The...

Application: On ships of approx. 5 - 12 t Very high-quality anchor line reel/spool made of stainless steel "Made in Finland" with either 25 m, 45 m or 65 m flat anchor/mooring line (Line width 50 mm, material thickness reel 6 mm) and friction brake. Suitable for mounting on horizontal or vertical railing tubes with diameter 22 - 30 mm. There are certainly very different...

Application: On ships of approx. 3 - 7 t Very high-quality anchor line reel/spool made of stainless steel "Made in Finland" with either 25 m, 45 m or 65 m flat anchor/mooring line (Line width 35 mm, material thickness reel 6 mm) and friction brake. Suitable for mounting on horizontal or vertical railing tubes with diameter 22 - 30 mm. There are certainly very different...

We recommend using the additional guide ring for anchor lines if the line or flat rope leaves the spool by more than 15° to the side. There are two versions - article AB-000125 for mounting on horizontal railing tubes and AB-000135 for mounting on vertical railing tubes. The guide can be attached to a tube diameter of 25 - 30 mm. In the box: Stainless steel ring with a...