No results were found for the filter!
LAGUN Mounting plate
Additional mounting plate/fixing base plate (92 mm x 170 mm x 13 mm) for the Lagun Cockpit table frame. The additional mounting plate/fixing base plate allows the table frame to be mounted and used in different places e.g. in the cabin or cockpit. In the box: Mounting plate/fixing base plate wooden counter plate 4 x stainless steel fixing screws incl. locknuts/washers (8 mm...
From €39.95 *
Hint!
LAGUN Extension bracket for the LAGUN mounting plate
The LAGUN Extension bracket made of aluminium is always the right solution when the LAGUN table frame is mounted on a cockpit locker or bench where the lid or a sofa cushion protrudes. The table leg cannot then be fitted as it will hit the cushions or the lid. This is remedied by the spacer plate, which creates a distance of 25 mm from the vertical wall and thus enables the...
€44.95 *
LAGUN shim/wedge
Additional plastic shim/wedge (92 x 170 mm) for mounting the Lagun cockpit table frame if the mounting area is off vertical. In the box: 1 x plastic compensation wedge (white) to be mounted under the mounting plate to compensate for the inclination of the cockpit locker/seat thwart etc. (max. thickness of the individual wedge approx. 5 mm)
€5.45 *
Hint!
LAGUN Extra small mounting plate
Extra small LAGUN mounting plate (170 mm x 30 mm x 13 mm) for the LAGUN Cockpit table frame. The plate allows the mounting of the table frame in places where there is not enough space for the standard plate - e.g. on the B-pillar of the motorhome, on the seat, on a mast feet in the cabin or on the steering pedestal. Important - mounting with the narrow plate requires a very...
From €25.95 *
LAGUN Mounting plate w/o mounting material
Additional mounting plate/fixing base plate (170 mm x 92 mm x 13 mm, 355 gr.) for the Lagun Cockpit table frame. The additional mounting plate/fixing base plate allows the table frame to be mounted and used in different places e.g. in the cabin or cockpit. ATTENTION: This item is only the mounting plate - without any fixing material! In the box: Mounting plate/fixing base plate
€29.95 *
LAGUN Replacement handle
The replacement handle fits on all handle positons of the Lagun Table Mount. It has a push button to allow the handle to operate like a ratchet - "free wheel function". In the box: replacement handle/lever black
€12.95 *
Viewed