NOA boat cover frames made of aluminium

Once the summer is over, the boat care does not stop - even if this is usually not the highlight of boating season, winter storage requires special attention to maintain the value of the boat. A common and usually cheapest solution is to store the boat outside under a tarpaulin so that it can dry - especially from the inside. For the professional and safe installation of the winter tarpaulin, we offer the probably most extensive assortment of A-frames, deck frames, outlaying frames and boathouses, which offers a solution for almost every leisure boat. It is manufactured by NOA in Sweden. NOA is Scandinavia's leading manufacturer of deck frames, which are made of high-quality materials such as aluminium and stainless steel and therefore allow a long lasting and durable use, even under extreme conditions.

Once the summer is over, the boat care does not stop - even if this is usually not the highlight of boating season, winter storage requires special attention to maintain the value of the boat. A... read more »
Close window
NOA boat cover frames made of aluminium

Once the summer is over, the boat care does not stop - even if this is usually not the highlight of boating season, winter storage requires special attention to maintain the value of the boat. A common and usually cheapest solution is to store the boat outside under a tarpaulin so that it can dry - especially from the inside. For the professional and safe installation of the winter tarpaulin, we offer the probably most extensive assortment of A-frames, deck frames, outlaying frames and boathouses, which offers a solution for almost every leisure boat. It is manufactured by NOA in Sweden. NOA is Scandinavia's leading manufacturer of deck frames, which are made of high-quality materials such as aluminium and stainless steel and therefore allow a long lasting and durable use, even under extreme conditions.

10 From 10
No results were found for the filter!
Angel joint connector
Angel joint connector
Rohrverbinder für die Verbindung zweier Rohre in variablen Winkeln. Ein durchgehendes 35 mm Rohr (Firstrohr, Teleskopstütze) und ein Rohrende (Firstrohr, Teleskopstütze) werden mit diesem Rohrverbinder zu einem T verbunden. Das durchgehende Rohr wird durch zwei Halbschalen geklemmt. Das Rohrende wird im Rohrverbinder mit einer Madenschraube fixiert. Der Winkel kann...
€30.95 *
NOA Aluminium Tube 30 mm incl. two-pronged end fitting
NOA Aluminium Tube 30 mm incl. two-pronged end fitting
Original NOA Aluminium Rundrohr mit 30 mm Durchmesser und einer Wandstärke von ca. 2 mm. Das 30 mm Aluminium Rohr wird als Innenrohr für die NOA Teleskop-Deckstützen und Relingsstützen als auch als Aussenrohr für das Überhanggestell verwendet.
From €12.95 *
NOA Rohrhalter I outmar.com
NOA Round Rail fitting
NOA Round Rail fitting to fasten virtually anything to a railing on boats, pontoons, house boats, balconies etc. The clamp body consists of two seawater resistant aluminium clamp halfs with a screw eye and has an outside diameter of 30 mm/40 mm and two weather proof and UV resistant plastic half inserts in various diameters for tubes with 18 mm, 22 mm, 25 mm for the 30 mm...
From €12.50 *
Schloßschraube M8x40 mm DIN 603 A4 mit Flügelmutter
Schloßschraube M8x40 mm DIN 603 A4 mit Flügelmutter
Ersatz Schloßschrauben aus A4 für NOA Aluminium und LAGUN Artikel. M8 x 50 LAGUN Tischarm, LAGUN Tischbein (Zusäzlich wird ggf. der LAGUN Klemmschrauben Hebel benötigt) M8 x 40 NOA Rohrhalter (Zusätzlich wird ggfs. die Flügelmutter OU-11720 benötigt) M8 x 30 NOA Spibaum Endbeschlag (NA-10827), NOA Multifunktionshaken (NA-10831),
€1.10 *
10 From 10
Viewed